最近搭建了NTP时间服务器,下面就将整个过程记录下来,为他人也为自己,即使很简单。
具体步骤:1,下载NTP时间服务器的.tar.gz包到linux下,解压到自己喜欢的目录
2,直接./configure,然后make
3,这样在众多文件夹里面就有叫/ntpd和/ntpq、/ntpdate的文件夹了,这里面就有编译生成的命令了,可以拿来直接使用的。很多人觉得要make install,我个人觉得没必要。
4,简单的NTP服务器需要,一个ntpd指令,一个ntp.conf配置文件,再一个ntpq指令就够了,如果想做客户端的话当然得要用ntpdate指令了。
5,配置文件要考在/etc/ntp.conf,如果做服务器这里的配置文件可以这么写,见底部。
遇到的问题:两台linux之间,有时#./ntpd 后,#ps -e 可以看到该进程,但是客户端就是连不上,虽然可以ping通,最后发现果然和google上说的一样,要注意时间,有的NTP服务器要一个小时才能正常工作(鸟哥说的),所以如果你的服务器还是不好使,不妨等上一会,然后在试。
我的配置文件:
# For more information about this file, see the man pages
# ntp.conf(5), ntp_acc(5), ntp_auth(5), ntp_clock(5), ntp_misc(5), ntp_mon(5).
driftfile /var/lib/ntp/drift
# Permit time synchronization with our time source, but do not
# permit the source to query or modify the service on this system.
restrict default nomodify
restrict -6 default nomodify
# Permit all access over the loopback interface. This could
# be tightened as well, but to do so would effect some of
# the administrative functions.
restrict 127.0.0.1
restrict -6 ::1
# Hosts on local network are less restricted.
#restrict 192.168.1.0 mask 255.255.255.0 nomodify notrap
# Use public servers from the pool.ntp.org project.
# Please consider joining the pool (http://www.pool.ntp.org/join.html).
#server 0.fedora.pool.ntp.org iburst
#server 1.fedora.pool.ntp.org iburst
#server 2.fedora.pool.ntp.org iburst
#server 3.fedora.pool.ntp.org iburst
#broadcast 192.168.1.255 autokey # broadcast server
#broadcastclient # broadcast client
#broadcast 224.0.1.1 autokey # multicast server
#multicastclient 224.0.1.1 # multicast client
#manycastserver 239.255.254.254 # manycast server
#manycastclient 239.255.254.254 autokey # manycast client
# Undisciplined Local Clock. This is a fake driver intended for backup
# and when no outside source of synchronized time is available.
server 127.127.1.0 # local clock
fudge 127.127.1.0 stratum 10
# Enable public key cryptography.
#crypto
includefile /etc/ntp/crypto/pw
# Key file containing the keys and key identifiers used when operating
# with symmetric key cryptography.
keys /etc/ntp/keys
# Specify the key identifiers which are trusted.
#trustedkey 4 8 42
# Specify the key identifier to use with the ntpdc utility.
#requestkey 8
# Specify the key identifier to use with the ntpq utility.
#controlkey 8
# Enable writing of statistics records.
#statistics clockstats cryptostats loopstats peerstats
相关推荐
只有两个配置文件 一个服务器 一个客户端 替换就可以了
Suselinux11NTP服务器端搭建设置宣贯.pdf
本文介绍了在Linux下配置NTP架设本地的时间服务器的方法。
搭建NTP服务器所需要的离线安装包,使用方式 #安装ntp服务器以及其依赖包 rpm -ivh autogen-libopts-5.18-5.el7.x86_64.rpm rpm -ivh ntp-4.2.6p5-18.el7.centos.x86_64.rpm rpm -ivh ntpdate-4.2.6p5-18.el7.centos....
一键设置ntp服务器和客户端,在红帽Linux和win2008R2实测。使用前请先打开脚本看清楚说明。
安装ntp程序后服务器即使ntp服务器端又是ntp客户端,启用了ntp服务,同时在本机执行ntpdate 同步时间会出现问题”the NTP socket is in use, exiting”,解决办法是停止本机的ntp服务程序。 NTP (server,client) ...
linux下ntp时间服务器的搭建与配置.docx
本文主要讲述了对于NTP服务器和客户端如何进行配置,本文主要以LINUX和CISCO交换机为例,详细的介绍了配置过程和操作步骤,下面文章将会使你受益匪浅。 出于网管的目的,我们架设了syslog,来监控交换机日志,同时也...
Suselinux11NTP服务器端搭建设置.pdf
Suselinux11NTP服务器端搭建设置借鉴.pdf
NTP服务器将本地系统的时钟与一个公共的NTP服务器同步然后作为时间主机提供服务,使本地网络的所有客户端能同步时钟。 同步时钟最大的好处就是相关系统上日志文件中的数据,如果网络中使用中央日志主机集中管理日志...
NTP服务器配置自动脚本(chrony)
安装操作系统 系统版本CentOS release 6.5 (Final)mini安装 关闭SELinux 关闭防火墙功能 关闭SSH的UseDNS功能 配置IP地址 配置DNS服务器 配置NTP服务器 配置主机名
3.1.1构建NTP时间服务器 3.1.2构建DHCP服务器 3.1.3搭建 Samba服务器 3.1.4搭建NFS服务器 3.1.5搭建FTP服务器 3.1.6构建 Apache WER服务器 3.1.7构建 MySQL服务器 3.1.8LAMP架构网站搭建 3.1.9 Cact i监控平台搭建 ...
H3C_NTP时钟同步基础配置案例,原创文档。 适用于H3CV7版本的网络设备,包括交换机、路由器等。 搭建环境为HCL3.0.1,适用于刚入门的网络工程师学习参考。
redhat/centos 7 搭建NTP服务器,yum安装 ntp服务,并对外提供时间服务的详细说明
基于嵌入式linux平台,开发的SNTP(NTP)服务器原代码,快速实现内部局域网或公共互连网网络授时服务器的搭建。
运维人员
ntp-4.2.6p5-29.el7.centos.2.x86_64.rpm ntpdate-4.2.6p5-29.el7.centos.2.x86_64.rpm openssl-1.0.2k-19.el7.x86_64.rpm openssl-libs-1.0.2k-19.el7.x86_64.rpm 一键安装命令: rpm -ivh *.rpm --force --nodeps
3.1. 1 构建NTP时间服务器 25 3.1. 2 构建DHCP服务器 27 3.1. 3 搭建Samba服务器 29 3.1. 4 搭建NFS服务器 32 3.1. 5 搭建FTP服务器 33 3.1. 6 构建Apache WEB服务器 35 3.1. 7 构建MySQL服务器 38 3.1. 8 LAMP架构...